Pre-formation Probability of 5He Cluster in Pre-equilibrium Mechanism

The possibility of 5He cluster emission has been affirmed theoretically. In order to describe the emission probability of 5He cluster, the pre-formation probability of 5He cluster in pre-equilibrium emission process is needed to be established. In terms of Iwamoto-Harada model, the theoretical formula of pre-formation probability of 5He cluster including 1p shell nucleon in pre-equilibrium mechanism has been established and calculated. In the case of low incident energies, the configuration of [1, m] for 5He cluster is the dominant part in the nuclear reaction. The calculated results indicate that pre-formation probability of configuration [1, m] for the unstable 5He cluster is much smaller than those of d, t, 3He, and 4He, i.e. the light stable composite particles, which are consisted of only 1s shell nucleons. However, it is propitious to the emission of 5He from the point of view on threshold energies, since the binding energies of 5He are generally lower than that of 3He in compound nucleus. The corresponding model formula has been given in this paper for described pre-formation probability of 5He cluster in pre-equilibrium mechanism.     

复合材料中加捻纤维束的预应力效应

利用加捻纤维束的力学性能,可以制成预应力复合材料.在不受外力的情况下,这种复合材料的基体受压应力的控制.当有拉伸力作用的时候,材料所受的拉应力值会大大减少,这样,利用这种现象可以提高纤维增强复合材料的抗拉强度.本文将分析连续的加捻纤维束受拉状况并考虑到材料固化后产生的残余应力的影响.这种方法所产生的预应力取决于纤维束的加捻程度.本文将给出计算这种预应力的方法,而且还提供加捻纤维束产生预应力的光弹测试结果以及这种纤维预应力复合材料的纤维破坏的特征.     

导爆管起爆器瞬态电火花温度的光谱法测定

应用双谱线原子发射光谱测温法的原理，建立了一套石英光导纤维传输的瞬态实时双谱线测温系统，它的时间分辨率最高可达0.1цs，所采用的两条谱线的波长分别为Cu I 510.5和Cu I 521.8nm。利用该套装置，研究了在不同电压下导爆管起爆器的放电火花温度随时间的变化，以及不同放电条件下的电火花持续时间。试验表明：对给定的起爆器火花的温度，是在2100-4200K范围内变化，放电时间随充电电压的提高而增长。     

Morphology of Composite Nanoparticles of Immiscible Binary Systems Prepared by Gas-evaporation Technique and Subsequent Vapor Condensation

X–Y composite nanoparticles of four immiscible binary systems (Si–In, Ge–In, Al–In and Al–Pb) were prepared by the condensation of Y vapor onto X nanoparticles produced in advance by a gas-evaporation technique. The nanoparticles, which were observed by electron microscopy, were composed of two or more crystallites of the elements with different morphology. Their growth process is discussed with reference to the phase diagrams.     

厚翅片管内流体流动和传热的数值分析

本文应用Ｐａｔａｎｋａｒ等人［１］研究薄翅片管的湍流模型，对一种工业化的厚翅片管内的流体流动和传热进行了数值分析。计算范围包括了层流和湍流（Ｒｅ＝１０１～１０６），所得计算结果与较窄范围内实验所测的传热与阻力数据相当符合，本计算结果具有较大的推广价值。     

单向复合纤维材料弹性系数的超声测量

本文将单向复合纤维材料视作六角对称晶体，认为其弹性特征由五个独立的弹性系数来描述。利用Christoffel方程，我们得到这一各向异性介质中不同方向的声波速度与弹性系数的关系．我们还建立了一套计算机控制的实验测量系统，通过它对纤维板样品中的声速进行测量，反演得到了五个独立的弹性系数C11、C33、C13、C14和C12。理论计算得到的声速和实验测量值吻合较好，表明我们的方法是有实用意义的。     

分层复合材料光波导的非线性二次增强效应

通过对分层复合材料光波导ＴＭ模等效介电系数的分析，清楚地预言了无限扩展分层复合材料结构中的非线性增强将因光波导的边界作用而引起进一步的加强。     

Preparation and Characterization of Niobium Oxide Coated Cellulose Fiber

The Nb₂O₅/cellulose composite was prepared by reacting α-cellulose with NbCl_5-n(OC₂H₅)_n, in nonaqueous solvent, under nitrogen atmosphere and submitting the obtained material to hydrolysis. An increase in the crystallinity degree is observed in the composite material because the precursor reagent reacts with the amorphous phase of the cellulose fibers. Loadings between 4.5 and 16.0% of the oxide were achieved and in every case the oxide particles uniformly cover the fiber surface. Lewis and Brønsted acid sites were determined by using pyridine as the basic molecular probe.     

用来激励高频超声换能器的电激励源

讨论了超声换能器的几种激励方法，分析了三种常用激励方法在激励高频超声换能器时的特点及其同局限性，我们雪崩ＭＡＲＸ电路制作的单极窄脉冲能地激励率高达１００ＭＨｚ的换能器并取得了较好的结果。     

黄原酯棉分离富集和石英缝管技术的FAAS测定环境水中痕量铅

本文研究了黄原酯棉富集铅的条件，探讨了应用石英缝管技术测定铅的方法。实验表明ｐＨ＝７左右时，黄原酯棉能够定量地富集水中痕量铅，以１％ＨＮＯ３、水浴２０ｍｉｎ即可定量解脱。应用石英缝管技术可比常规火焰测定铅的灵敏度提高３．３倍。本方法可应用于野外富集。